Metal Prep 4K: For better paint-to-metal adhesion!
Model paints especially water-based types may have trouble adhering to metal parts. It's quite easy to scuff the surface and paint or primers peeling from large metal surfaces such as tank skirts is not uncommon. With VMS Metal Prep you will be doing your paint coat a favour - it will be much more durable if applied over parts primed with our metal primer!
FOR SCHURZEN (SKIRTS)
FOR METAL BOXES AND THE LIKE
FOR ZIMMERIT SHEETS
FOR METAL BARRLES
APPLIED WITH BRUSH...
...IS INVISIBLE AFTER APPLICATION
MetaL Prep 4K ensures that the paint applied over metal parts adheres much better and is not prone to scuffing or flaking off!
See Metap Prep 4K in action!
VMS Metal Prep 4K PRODUCT SUMMARY
Metal Prep 4K is a primer for photo-etched and other metal parts boosting paint adhesion an mitigating problems such as paint peeling at vulnerable areas, paint scuffing or general poor adhesion of acrylic paints. Paint coats preceded by Metal Prep 4K gain much desired durability. Product is applied with a brush to form a translucent and thin film which won't affect a model's detail. IMPORTANT: Please degrease metal parts with VMS Styrene Cement Standard Type or VMS Universal weathering carrier prior application of the primer! IMPORTANT: The acrylic product is susceptible to low temperatures and mustn't be frozen! Store and handle in room temperature.
Combine with: Photo-etched
Recommended techniques: Brush or airbrush
Available volumes: 30 ml dropper bottle
Metal Prep 4K FAQ
What's the best technique for precise application of the primer?
Use flat or cat's tongue brushes apply thin coat and let it level on it's own.
How effective is the primer?
One model requires around 0.5-1 ml of primer depending on the PE amount, bottle holds 30 ml. You will be able to finish around 30-60 1/35 scale models before you run out of the primer.
What agent to use to clean brushes?
Please use cleaning products for acrylic paints such as VMS Cleaners Pro or an equivalent.
How long do I need to wait before I can start painting my model?
Primer dries in 15-30 minutes depending on ambient temperature. You can usually start painting in 20 minutes after application.
Can I airbrush the primer?
Yes, the primer can be airbrushed. Please ensure low ambient temperature and an even, wet layer of primer for good results.
