top of page

Specialised glue for clear plastic!

Clear parts require special handling, both styrene and CA glue types will damage clear plastic and classic dedicated clear parts adhesives are irreversible making them a hit and miss solution. With VMS Transpa Fix 6K you will have all the time in the world to position the parts and excessive adhesive is easily removed producing a stunning result!

Clear plastic model windshield

TRANSPA FIX 6K SAMPLE 1

Clear plastic model window

TRANSPA FIX 6K SAMPLE 2

Clear plastic model window olympia

TRANSPA FIX 6K SAMPLE 3

Clear plastic model back window

TRANSPA FIX 6K SAMPLE 4

clear plastic headlight lens
clear plastic model car headlight lens

TRANSPA FIX 6K SAMPLE 5

TRANSPA FIX 6K SAMPLE 6

Transpa Fix 6K allows you to well position the clear plastic parts and any glue residue is easily done away with for a perfect result!

See Transpa Fix 6K in action!
Plastic-safe and modelling friendly!

This glue will allow you to perfectly align your clear part, be it a canopy, wind shield or searchlight. It won't damage the the parts and can be reversed using VMS Universal weathering carrier for a perfect result! The glue itself is crystal clear when dry. 

VMS Transpa Fix 6K  PRODUCT SUMMARY
TRANSPA FIX 2022.png

Clear parts require special handling, both styrene and CA glue types will damage clear plastic and classic dedicated clear parts adhesives are irreversible making them a hit and miss solution. With VMS Transpa Fix 6K you will have all the time in the world to position the parts and excessive adhesive is easily removed producing a stunning result! IMPORTANT: The recommended glue thinner for Transpa Fix 6K is VMS Universal weathering carrier light type, which will not damage clear parts! 

Combine with: Clear parts

Recommended techniques: Brush

Available volumes: 20 ml bottle

1xbrush-sole.png
1xglue-drop.png
Transpa Fix 6K FAQ

What's the best technique for precise application of the adhesive?

 

Use precision brush.

How effective is the adhesive?

One model requires around 0.1-0.3 ml of adhesive, since the bottle holds 30 ml it will last you forever. 

The glue dries too quickly, produces strings and seems thick!

Add some Universal weathering carrier to slow drying and improve flow. Please use small amounts of the Universal weathering carrier as no glue is good when over-thinned. 

How long does it take for the glue to harden?

Dispensed glue will be dry to touch in less than 1 hour but since it's trapped between plastic parts when applied allow 24-48 h for it to achieve durability. 

How is this better than my other glues?

It's simple, this glue will not affect your clear or painted parts. While the usual modelling glues can cause plastic crazing or fogging Transpa Fix 6K will not, the photo below says is all:

7x.png

TRANSPA FIX 6K vs CA/STYRENE GLUE

Can I use the adhesive to cement PE to clear parts or acetate cut outs?

Yes, please remember to degrease PE parts using VMS Styrene Cement standard (fast) type. 

Can I use the adhesive to cement clear parts to painted plastic?

Yes, in case you painted your model with acrylics there are no constrains. If you painted the model with enamels minimise the glue manipulation and thinner use. 

The glue left some residue on the clear parts and model, how to remove it?

Please wipe the glue using a brush soaked with Universal weathering carrier light type. 

What agent to use to clean brushes?

Please use Universal weathering carrier standard or light types. 

bottom of page